Prosthetic Tool Range
Prosthetic & Orthotic Dust Collector
Dust Collection for Professional P&O Workshops
The NSEW Dust Collector is powered workshop equipment designed to collect dust and debris generated during appropriate prosthetic and orthotic fabrication processes.
Overview
What The Dust Collector Does
The NSEW Dust Collector is powered workshop extraction equipment designed for use in professional prosthetic and orthotic fabrication environments.
Shaping, sanding and finishing operations performed during P&O fabrication can generate dust and debris. A workshop dust-collection system provides a dedicated means of extracting and collecting this material when connected and operated according to the applicable fabrication process and workshop requirements.
The NSEW Dust Collector features an all-steel body and floor-standing configuration for professional workshop installation.
It can form part of a broader P&O fabrication environment alongside appropriate dust-generating equipment such as a Linisher or Router where technical compatibility and extraction requirements have been confirmed.
Electrical and motor configurations should be presented according to verified NSEW technical specifications.
Key Features
Built For The Workshop Floor
Workshop Dust Collection
Designed to collect dust and debris generated during appropriate prosthetic and orthotic fabrication processes.
All-Steel Body
All-steel construction provides a robust floor-standing structure for professional workshop installation.
Powered Extraction
Powered extraction supports dust collection during appropriate P&O fabrication operations.
P&O Workshop Application
Designed for professional prosthetic and orthotic fabrication environments.
Single / Three-Phase Options
Supplied technical information identifies single-phase and three-phase configurations; confirm the required electrical configuration when ordering.
Fabrication Equipment Integration
Designed to support workshop dust-management requirements around appropriate fabrication equipment.
Where It's Used
Applications
- Prosthetic fabrication workshops
- Orthotic fabrication workshops
- Dust collection during appropriate shaping processes
- Dust collection during appropriate sanding processes
- Dust collection during appropriate finishing processes
- Fabrication laboratories
- P&O technical training facilities
- Workshop dust-management systems
Confirmed Data
Technical Specifications
Only confirmed and general specification data is listed below. Overall dimensions, weight, airflow, filter details and certifications are available on enquiry.
| Product Name | Dust Collector |
|---|---|
| Descriptive Type | P&O Workshop Dust Collector |
| Product Type | Powered Dust Collection / Extraction Equipment |
| Product Category | Prosthetic & Orthotic Workshop Equipment |
| Primary Application | Workshop Dust Collection |
| Body | All Steel |
| Phase Options | Single Phase / 3 Phase |
| Installation | Floor-Standing |
| Operation | Powered |
| Suitable For | Professional P&O Workshops, Fabrication Laboratories and Appropriate Training Facilities |
Electrical & Motor Configuration
The technical information supplied for this machine includes more than one motor and power value — a 2 HP motor listed as a feature, 220–230 V / 1 HP listed as technical data, and 440 V / 50 Hz / 3 Phase / 1.1 kW listed as power requirements. These values have not yet been reconciled into a single confirmed specification, so none of them is presented above as a definitive fact. Please confirm the required motor and electrical configuration with NSEW when ordering.
Understanding The Product
What Is a P&O Dust Collector?
A P&O dust collector is workshop extraction equipment used to collect dust and debris generated during appropriate prosthetic and orthotic fabrication processes such as shaping, sanding and finishing.
Workshop Dust Management
Why Is Dust Collection Used in Prosthetic & Orthotic Workshops?
Prosthetic and orthotic fabrication can involve material-removal processes that generate dust and debris. A workshop dust collector helps extract and collect this material at appropriate fabrication stations as part of the workshop's dust-management setup.
Workshop Integration
Dust Collection for Linisher Operations
A Linisher uses a continuous abrasive belt for shaping, sanding and finishing operations and can generate dust and debris depending on the material being processed.
The NSEW Dust Collector is designed for workshop dust collection, while the NSEW Linisher incorporates an extraction duct.
The appropriate extraction connection and technical compatibility should be confirmed for the selected equipment configuration.
Workshop Integration
Dust Collector + Router
The NSEW Router is designed with a connection for a central dust-extraction system. Where the Dust Collector is being considered as part of the same workshop setup, confirm connection dimensions, airflow requirements and technical compatibility for the selected equipment.
The Router's specification states a Ø120 mm extractor connection; the Dust Collector's own connection diameter has not been separately verified, so the two are not assumed to match.
Why Choose NSEW
Built By The Same Workshop, Every Time
- 15+ years manufacturing prosthetic and orthotic workshop equipment from Naraina Industrial Area, Delhi
- Dust Collector body and extraction hardware built and quality-inspected in-house
- Direct manufacturer contact for fabrication guidance and quote-ready specification support
Common Questions
Dust Collector FAQ
What is a prosthetic and orthotic Dust Collector?
A prosthetic and orthotic Dust Collector is powered workshop equipment used to collect dust and debris generated during appropriate P&O fabrication processes.
What is the NSEW Dust Collector used for?
The NSEW Dust Collector is designed for dust collection during appropriate shaping, sanding and finishing processes in professional prosthetic and orthotic fabrication environments.
Is the NSEW Dust Collector designed for P&O workshops?
Yes. It is intended for professional prosthetic and orthotic fabrication workshop environments.
What is the NSEW Dust Collector body made from?
The supplied NSEW specification identifies an all-steel body.
Is the NSEW Dust Collector available in single-phase and three-phase configurations?
The supplied NSEW product information identifies single-phase and three-phase configurations. The exact electrical and motor configuration should be confirmed when selecting the machine.
Can a Dust Collector be used with a Linisher?
A dust collector can form part of the extraction setup for abrasive finishing equipment. The NSEW Linisher includes an extraction duct; connection and extraction requirements should be confirmed for the selected equipment configuration.
Can the Dust Collector be used with the NSEW Router?
The NSEW Router provides a connection for a central dust-extraction system. Confirm connection dimensions, extraction requirements and compatibility before configuring the Dust Collector with the Router.
Does a Dust Collector replace personal protective equipment?
No. Workshop dust collection is one part of an appropriate dust-management approach. Required PPE and operating controls depend on the material, process and applicable workplace safety requirements.
Is the Dust Collector a medical device?
The NSEW Dust Collector is workshop fabrication equipment for dust collection in P&O environments; it is not a patient-worn prosthetic or orthotic component.
Works Alongside